MicroView and Phoenard Arduino Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Sabrina_LS

Registered:
Posts: 8
Reply with quote  #1 

The programmer we are going to use in this tutorial is the AVRISP, which can be purchased at cutedigi. We wire an Arduino Uno to a ZIF socket with Atmega320 removed.

0318_1

First, we need to download the Atmel Studio from here.

Second, install the Arduino IDE. The Arduino IDE can be downloaded from this location. The version we installed is Arduino 1.6. The bootloader is located in the following directory:

\Arduino\hardware\arduino\avr\bootloaders\optiboot

One pitfall we found is that the AVRISP’s COM port cannot be larger than COM8. Please make sure we configure the COM port of AVRISP to be somewhere between COM1 and COM8.

the original post is from http://learn.linksprite.com/arduino/arduino-uno/burning-the-arduino-uno-bootloader-to-atmegsa328p-using-atmel-studio/

Previous Topic | Next Topic
Print
Reply

Quick Navigation:


Create your own forum with Website Toolbox!